IEC60529 Ipx3 Ipx4 Spray Nozzle for Waterproof Rain Tester

日期：2024-05-08 08:07

浏览次数：48

摘要：IEC60529 Ipx3 Ipx4 Spray Nozzle for Waterproof Rain Tester Test standard: The Spray Tester IPX 3/4 is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is convenient positioned by the Spray Tester IPX 3/4.The spray pattern of the nozzle is made to the specifications of IE6C0529. The removable shield feature mak

Test standard:
The Spray Tester IPX 3/4 is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is convenient positioned by the Spray Tester IPX 3/4.The spray pattern of the nozzle is made to the specifications of IE6C0529. The removable shield feature make it easy to test without the interference of the shield .

Application:
Spray Tester IPX 3/4 is designed to perform tests in large and small scale products. It is a great option when a portable tester is necessary. The Spray Tester IPX 3/4 is an alternative to the Oscillating Tube for establishing the degree of protection against ingress water.

The Spray Tester IPX 3/4is intended for use on specimens that will not fit within the diameter of the Tube Tester. The primary IEC tests include IPX3 and IPX4 protection against water spraying and splashing water.

Parameters:

No.	Item	CX-IPX3/4 SPRAY NOZZLE
1	water supply	water flow rate is 50~150kpa clean water without inclusion
2	spray nozzle parameters	EXternal diameter:102mm Spherical diameter:S 75.5mm there is a miiddle hole and 24 holes in the internal circle which the included angle is 30 °. There 96 holes in the external circle of holes of which the included angle is 15°.
3	water flow	10L/min,Flow meter is adjustable
4	baffle	removable
5	pressure gauge	0~0.25Mpa
6	site requirements	dedicated IP waterproof test room The ground should be flat with illumination with good function of inflow and drainage.

Product features:

Pressure Gauge	0 - 1.6 bar
Number of Holes	121
Diameter of Nozzle Holes	0.5
Material	Spray nozzle make of brass
Reference	IEC60529, IEC60598-1, IEC 60335-1, IEC60745-1

Next: IEC60529 Ipx5 Ipx6 Strong Pressure Waterproof Test Equipment
Previous: IEC60884 1n/20n Test Pin Probe for Socket Door is application