Product Details
查看大图

  • Product name：IEC60529 dust test chamber

  • Product number：CX-SC56A
  • Product manufacturer：Chuangxin
  • Product documentation：
你添加了1件商品 查看购物车
a brief introdction：
dust test chamber Application: The test box for low-voltage electrical appliances, motors, instruments, meters, lamps, household appliances and other products, in the storage, transportation and use of the process are often affected by dust and dust environment.
Details description：

IEC60529 dust test chamber 

Complied Standards & Clauses

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IP5 & IP6.

Product Description
Application:
The sand and dust test chamber is simulates the destructive nature of the natural sand-sand climate and is suitable for testing the shell sealing performance of the product. It is mainly used for the tests of IP5X and IP6X specified in the enclosure protection level standard.
The test chamber is use for low-voltage electrical appliances, motors, instruments, meters, lamps, household appliances and other products, in the storage, transportation and use of the process will often be affected by dust and dust environment.Especially cars, electrical appliances affected by sand dust is more significant. This equipment is the use of artificial simulation of dust and dust environment, to test the test dust on the test equipment, test specimens in this environment, the sealing and corrosion resistance
Technical parameter

Vacuum works principle:
The sample and the suction pipe connected to start the vacuum pump, adjust the manual valve required flow, the sample air through the suction pipe into the filter. (Filter can be removed blown impurities), filtered clean air by the pressure gauge, flow meter, discharged by the vacuum pump. 

Precautions for use: 
1 Before starting the test, please pay attention to the power supply, and then set the test parameters.
2 During the test, it is forbidden to open the door to avoid dust pollution in the laboratory.
3 After the test is over, please let it stand for 10-15 minutes to deposit a large amount of dust before opening the door.

粤公网安备 44030602001691号