IEC 60529 IPX1-8 IP Test Equipment

Product Description

IEC 60529 IPX1-8 IP Test Equipment IEC60529 Water Jet Test.IEC60529 Waterproof Test Equipment,ingress protection test IEC 60529 IPX1-8 IP Test Equipment.pdf

IEC 60529 IPX1/IPX2

 Specification

1. Drip board area: 1000 X1000mm

2 .Outer size: 1100 X 1200 X 2500 mm (L*D*H)

3. Diameter of turntable: Φ 800mm plain perforated base with more perforations without boundaries

4. Diameter of perforation for turntable base: 0.8cm, equipped with British M8 screw

5. Hole Pitch for turntable base: 5cm

6. Aperture of drop : 0.4mm

7. Pitch-row(mm): 20 mm X 20 mm

8. Delivery rate: Manual(IPX1:1±0.5mm/min, IPX2: 3±0.5mm/min)

Preferred variable water delivery from 0.5mm / min to 10mm / min)

9 .Water flow meter required to indicate rainfall

10. Adjustable Height of drip board : 500~1800mm

11. Product under test (max): 50kg, dia. 800mm

12. Turntable speed: 1 RPM ( With Adjustable Speed)

13. Turntable height:600mm (Adjustable)

14. Turntable angle: 15°

16. Test time: 0~9999min

17. The drip hole has a protective plate to prevent accidental injury to the operator. For example, the installation of the sample may accidentally injure the operator's head,as shown in the picture below

 IEC 60529 IPX3/IPX4

Specification

1 Oscillating tubes :R1600, R1400, R1200, R1000, R800, R600, R400 and R200 (mm)

2 Oscillate angle: 120º (IPX3), 350º (IPX4) or user-defined ( Adjustable angle)

3 Inner diameter of oscillating tube (mm) : 15

4 Hole Pitch : 50 mm

5 Diameter of blowhole: 0.4 mm

6 Water flow rate per hole : 0.07 L/ min ( Adjustable)

7 Turntable with adjustable speed: Φ800 mm

8 Height of turntable: 1000-1950 mm (Preferred)

9 Water pressure: Display

10 Product under test (max): 50 kg

11 Material of tube: SUS304 stainless steel (Preferred)

12 Duration of test : 0~9999min

13. The drip hole has a protective plate to prevent accidental injury to the operator.

IPX3 and IPX4 Spray Nozzle

Specification

1 Nozzle Diameter : 102mm

2 Sphere Diameter: 75.5mm

3 Hole No. : 121pcs

4 Hole Diameter : 0.5mm

5 Nozzle Material : Brass

6 Water Discharge : 10L/min±5%, adjustable

7 Pressure Gauge Range: 0~0.4Mpa

8. 121 holes of 0.5mm; 1 hole at the center, 1 inner circles of 12 holes at 30°pitch, 4 outer circles of 24 holes at 15°pitch

9 Flapper Detachable

IPX5 and IPX6 nozzle

 Specification

1 Control system: PLC controlled

3 IPX5 nozzle diameter: 6.3 mm

4 IPX6 nozzle diameter: 12.5 mm

5 IPX5 water flow: 12.5±0.62 L/min

6 IPX6 water flow: 100±5 L/min

7 Water pressure: adjustment

8 Water flow control adjustable , measured with digital flow meter

9 Jet nozzle fixed type: hand-held

10. The center part of the main flow from the nozzle: 2.5m diameter of about 120 mm round;

11.Provide pipe and hose clamps.

IEC 60529 IPX7 and IPX1-8 water supply system 

Specification

1.Volume: 100L

2.Big flow pump: 0-7cbm/h

3.Small flow pump: 0-3cbm/h

4.Flow control: digital flow meter

5.IPX6 flow control: manual

6.Water supply: 4 ways, stainless steel pipe

7.Filter: ceramic filter

8.Power supply: 220VAC 50Hz

9.Pressure control: electronic gauge(IPX4 spray nozzle)

10. Control system: PLC controlled

11. IPX7 sample lifting method: electric lift; sample maximum weight: 150KG

IEC 60529 IPX8

Technical Parameters:

1. Pressurized container: stainless steel tank, diameter 600mm, height 1000mm;

2, pressure adjustment range: 0.01 ~ 1.0Mpa (simulated depth of 1-100 meters);

3, pressurized system: stainless steel pump + inverter pressure;

4, pressure gauge accuracy 0.25, measuring range 1.6Mpa;

5, test time: 0-9999S;

6, the maximum limit pressure: 1. 2 Mpa;

7, pressure protection: safety valve;

8, power: AC380V, 50HZ, 3KW;

9. Remarks: There are various specifications for the pressure vessel size and pressure range, which can be customized.