Requirements for IEC IP4X 1.0mm Test Wire

日期：2025-04-30 18:30

浏览次数：550

摘要： The IEC IP4X 1.0mm Test Wire is strictly designed according to IEC61032 Test Probe D Figure 4, IEC60529 IP4X, GB4208 IP4, GB/T16842 Probe D, GB8898, IEC60065, IEC60598, GB7000 etc. standards. The IEC IP4X 1.0mm Test Wire is intended to verify the protection of persons against to hazardous parts. It's also used to verify the protection against access with a wire. Technology parameters: Handle length: 100mm Handle diameter: 10mm Dam-s

The IEC IP4X 1.0mm Test Wire is strictly designed according to IEC61032 Test Probe D Figure 4, IEC60529 IP4X, GB4208 IP4, GB/T16842 Probe D, GB8898, IEC60065, IEC60598, GB7000 etc. standards.

The IEC IP4X 1.0mm Test Wire is intended to verify the protection of persons against to hazardous parts. It's also used to verify the protection against access with a wire.

Technology parameters:

Handle length: 100mm

Handle diameter: 10mm

Dam-sphere diameter: 35mm

Test Probe length: 100mm

Test Probe diameter: 1.0mm

Can custome with 1.0N force.

Next: Usage for IEC Fingernail Probe
Previous: Categories of VDE0620-1 Plug & Socket Gauge