Product Information

IEC Test Probes

If you are interested in this product, you can sendmsg
Product Name: IEC Test Probes
Product Model: CX-112
Product exhibitors: Chuangxin
Product Documentation: No Related Documents

Brief

IEC Test Probes is with high precision and can pass the calibration.


IEC Test Probes  A detailed description of
IEC Test Probes



Article Description European standards Other standards
P11.01 JOINTED TEST FINGER EN 60529 FIG. 1
EN 61032 FIG. 2
EN 60335-1
EN 60335-1/A13
23-50 FIG. 21
IEC 60529
IEC 61032
IEC 884-1
P 11.01a JOINTED TEST FINGER EN 60335-2-64 Fig. 1  
P11.02 RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50 N EN 60950
EN 60335-1
IEC 60335-1 Fig. 10
P 11.02a RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50-75 N    
P11.02b RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-100 N EN 61032 Fig. 7 IEC 60065 Fig. 3b
P11.03 SHORT TEST PIN EN 61032 Fig. 9
EN 60335-1
EN 60601-1
IEC 60335-1 Fig. 2
P11.04 LONG TEST PIN EN 61032 IEC 61032
P11.05 TEST MANDREL EN 61032 Fig. 16
EN 60335-1
IEC 60335-1 Fig. 3
P11.06 TEST NEEDLE Ø 1 mm , force 1 N CEI 23-50 Fig. 10 IEC 883
P11.07 TEST NEEDLE Ø 2, 5 mm , force 3 N    
P11.08 SHORT CIRCUIT TESTER, 48 V. with signal light EN 60335-1 par. 8.1 IEC 60529 par. 11.89
IEC 60598-1 par. 6.92
P11.09 TEST SPHERE Ø 50 mm with handle EN 60529
EN 61032 Fig. 1
IEC 60529
IEC 61032
P11.10 TEST NAIL to be applied to the rigid test finger EN 60335-1 Fig. 7 IEC 60335-1 Fig. 7
P11.11 TEST ROD Ø 2, 5 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529
EN 61032 Fig. 3
IEC 60529
IEC 61032
P11.12 TEST ROD Ø 1 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529
EN 61032 Fig. 4
IEC 60529
IEC 61032
P11.13 TEST PROBE Ø 12 mm , length. 80 mm with dynamometric handgrip and reference marks to forces of 10-20-30 -40-50 N EN 60950 Fig. 16 IEC 61010- par. 8.1.1
P11.14 SMALL FINGER PROBE Ø 8, 6 mm EN 61032 Fig. 12
EN 60335-2-75
 
P11.15 SMALL FINGER PROBE ? 5, 6 mm EN 61032 Fig. 13
EN 60335-2-75
IEC61032 IEC60065
P11.16 ACCESS PROBE TO HAZARDOUS FOOD WASTE DISPOSAL UNITS EN 61032 CEI IEC 61032, FIG. 14 – PROBE 31
P11.17 TEST BAR WIDTH 50MM, 5MM THICK ,175MM LONG EN61032 IEC 61032 FIG17 PROBE43
P11.18 TEST BAR WIDTH 3MM, 1MM THICK ,80MM LONG EN61032 IEC 61032 FIG10 PROBE14
P11.19 TEST NEEDLE Ø 0.5 MM, 20MM LONG EN61032 IEC 61032 FIG11 PROBE17
P11.20 "UL" FINGER PROBE   ACCORDING TO UL 1026,
FIG. 6.2 ,UL508 ,FIG.6.4,
UL153,FIG23.1;UL 982,
FIG. 7.1 UL507 FIG9.2,
UL1310-1994
P11.21 HAZARDOUS MOVING PARTS PROBE   UL507 FIG8.1, PA160B
P11.22 RIGIDITY TEST ROD PROBE,Ø 25.4 MM   UL507 FIG8.2 S2140A
P11.23 UNINSULATED LIVE PARTS PROBE   UL507 FIG1.1
P11.24 TACCESSIBILITY PROBE/WEDGE   UL 60950-1, FIG. NAF.2, FIG. NAF.3
P11.25 BLUNT-END PROBE   UL1310 FIG14.4(S3252)
P11.26 ENAMELED WIRE PROBE   UL1278 FIG 8.2(PA140A),UL398
FIG 8.2(PA170B) ,UL507(PA170D)
P11.27 TEST HOOK   CEI EN 60601-1,
FIG. 1 UL 6500, FIG. 8.2
P11.28 ULTEST FINGER    
P11.29 UL TEST PROBE   UL1287 FIG,10.1
P11.30 UL TEST PROBE   UL1287 FIG,10.2
P11.31 UL TEST PROBE   UL1287 FIG,10.3
P11.32 UL TEST PROBE   UL1287 FIG,10.4
P11.33 JOINTED IEC TEST FINGER   IEC6 0335-2-14
P11.34 JOINTED IEC TEST FINGER (Ø 125MM)    
P11.35 TEST PROBE PROBE32   IEC61032
P11.36 IEC STEEL ROD Ø 4 MM, 100 MM LONG EN61010-1 EC60065 9.1.3, IEC1010
P11.37 IEC STEEL ROD Ø 3 MM, 100 MM LONG EN61010-1,CSA1010-1 IEC1010, ,UL31010-1
P60950 TEST PORBE ABOUT IEC60950   IEC60950
P60601 TEST PORBE ABOUT IEC60601   IEC60601
P61010 TEST PORBE ABOUT IEC61010   IEC61010
P60335-1 TEST PORBE ABOUT IEC60335   IEC60335
P60529 TEST PORBE ABOUT IEC60529   IEC60529
Article Description European standards Other standards
P11.01 JOINTED TEST FINGER EN 60529 FIG. 1
EN 61032 FIG. 2
EN 60335-1
EN 60335-1/A13
23-50 FIG. 21
IEC 60529
IEC 61032
IEC 884-1
P 11.01a JOINTED TEST FINGER EN 60335-2-64 Fig. 1  
P11.02 RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50 N EN 60950
EN 60335-1
IEC 60335-1 Fig. 10
P 11.02a RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50-75 N    
P11.02b RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-100 N EN 61032 Fig. 7 IEC 60065 Fig. 3b
P11.03 SHORT TEST PIN EN 61032 Fig. 9
EN 60335-1
EN 60601-1
IEC 60335-1 Fig. 2
P11.04 LONG TEST PIN EN 61032 IEC 61032
P11.05 TEST MANDREL EN 61032 Fig. 16
EN 60335-1
IEC 60335-1 Fig. 3
P11.06 TEST NEEDLE Ø 1 mm , force 1 N CEI 23-50 Fig. 10 IEC 883
P11.07 TEST NEEDLE Ø 2, 5 mm , force 3 N    
P11.08 SHORT CIRCUIT TESTER, 48 V. with signal light EN 60335-1 par. 8.1 IEC 60529 par. 11.89
IEC 60598-1 par. 6.92
P11.09 TEST SPHERE Ø 50 mm with handle EN 60529
EN 61032 Fig. 1
IEC 60529
IEC 61032
P11.10 TEST NAIL to be applied to the rigid test finger EN 60335-1 Fig. 7 IEC 60335-1 Fig. 7
P11.11 TEST ROD Ø 2, 5 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529
EN 61032 Fig. 3
IEC 60529
IEC 61032
P11.12 TEST ROD Ø 1 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529
EN 61032 Fig. 4
IEC 60529
IEC 61032
P11.13 TEST PROBE Ø 12 mm , length. 80 mm with dynamometric handgrip and reference marks to forces of 10-20-30 -40-50 N EN 60950 Fig. 16 IEC 61010- par. 8.1.1
P11.14 SMALL FINGER PROBE Ø 8, 6 mm EN 61032 Fig. 12
EN 60335-2-75
 
P11.15 SMALL FINGER PROBE ? 5, 6 mm EN 61032 Fig. 13
EN 60335-2-75
IEC61032 IEC60065
P11.16 ACCESS PROBE TO HAZARDOUS FOOD WASTE DISPOSAL UNITS EN 61032 CEI IEC 61032, FIG. 14 – PROBE 31
P11.17 TEST BAR WIDTH 50MM, 5MM THICK ,175MM LONG EN61032 IEC 61032 FIG17 PROBE43
P11.18 TEST BAR WIDTH 3MM, 1MM THICK ,80MM LONG EN61032 IEC 61032 FIG10 PROBE14
P11.19 TEST NEEDLE Ø 0.5 MM, 20MM LONG EN61032 IEC 61032 FIG11 PROBE17
P11.20 "UL" FINGER PROBE   ACCORDING TO UL 1026,
FIG. 6.2 ,UL508 ,FIG.6.4,
UL153,FIG23.1;UL 982,
FIG. 7.1 UL507 FIG9.2,
UL1310-1994
P11.21 HAZARDOUS MOVING PARTS PROBE   UL507 FIG8.1, PA160B
P11.22 RIGIDITY TEST ROD PROBE,Ø 25.4 MM   UL507 FIG8.2 S2140A
P11.23 UNINSULATED LIVE PARTS PROBE   UL507 FIG1.1
P11.24 TACCESSIBILITY PROBE/WEDGE   UL 60950-1, FIG. NAF.2, FIG. NAF.3
P11.25 BLUNT-END PROBE   UL1310 FIG14.4(S3252)
P11.26 ENAMELED WIRE PROBE   UL1278 FIG 8.2(PA140A),UL398
FIG 8.2(PA170B) ,UL507(PA170D)
P11.27 TEST HOOK   CEI EN 60601-1,
FIG. 1 UL 6500, FIG. 8.2
P11.28 ULTEST FINGER    
P11.29 UL TEST PROBE   UL1287 FIG,10.1
P11.30 UL TEST PROBE   UL1287 FIG,10.2
P11.31 UL TEST PROBE   UL1287 FIG,10.3
P11.32 UL TEST PROBE   UL1287 FIG,10.4
P11.33 JOINTED IEC TEST FINGER   IEC6 0335-2-14
P11.34 JOINTED IEC TEST FINGER (Ø 125MM)    
P11.35 TEST PROBE PROBE32   IEC61032
P11.36 IEC STEEL ROD Ø 4 MM, 100 MM LONG EN61010-1 EC60065 9.1.3, IEC1010
P11.37 IEC STEEL ROD Ø 3 MM, 100 MM LONG EN61010-1,CSA1010-1 IEC1010, ,UL31010-1
P60950 TEST PORBE ABOUT IEC60950   IEC60950
P60601 TEST PORBE ABOUT IEC60601   IEC60601
P61010 TEST PORBE ABOUT IEC61010   IEC61010
P60335-1 TEST PORBE ABOUT IEC60335   IEC60335
P60529 TEST PORBE ABOUT IEC60529   IEC60529
Article Description European standards Other standards
P11.01 JOINTED TEST FINGER EN 60529 FIG. 1
EN 61032 FIG. 2
EN 60335-1
EN 60335-1/A13
23-50 FIG. 21
IEC 60529
IEC 61032
IEC 884-1
P 11.01a JOINTED TEST FINGER EN 60335-2-64 Fig. 1  
P11.02 RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50 N EN 60950
EN 60335-1
IEC 60335-1 Fig. 10
P 11.02a RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-20-30-40-50-75 N    
P11.02b RIGID TEST FINGER WITH DYNAMOMETRIC HANDGRIP AND REFERENCE MARKS TO FORCES OF 10-100 N EN 61032 Fig. 7 IEC 60065 Fig. 3b
P11.03 SHORT TEST PIN EN 61032 Fig. 9
EN 60335-1
EN 60601-1
IEC 60335-1 Fig. 2
P11.04 LONG TEST PIN EN 61032 IEC 61032
P11.05 TEST MANDREL EN 61032 Fig. 16
EN 60335-1
IEC 60335-1 Fig. 3
P11.06 TEST NEEDLE Ø 1 mm , force 1 N CEI 23-50 Fig. 10 IEC 883
P11.07 TEST NEEDLE Ø 2, 5 mm , force 3 N    
P11.08 SHORT CIRCUIT TESTER, 48 V. with signal light EN 60335-1 par. 8.1 IEC 60529 par. 11.89
IEC 60598-1 par. 6.92
P11.09 TEST SPHERE Ø 50 mm with handle EN 60529
EN 61032 Fig. 1
IEC 60529
IEC 61032
P11.10 TEST NAIL to be applied to the rigid test finger EN 60335-1 Fig. 7 IEC 60335-1 Fig. 7
P11.11 TEST ROD Ø 2, 5 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529
EN 61032 Fig. 3
IEC 60529
IEC 61032
P11.12 TEST ROD Ø 1 mm , length 100 mm , with stopping ball Ø 35 mm EN 60529
EN 61032 Fig. 4
IEC 60529
IEC 61032
P11.13 TEST PROBE Ø 12 mm , length. 80 mm with dynamometric handgrip and reference marks to forces of 10-20-30 -40-50 N EN 60950 Fig. 16 IEC 61010- par. 8.1.1
P11.14 SMALL FINGER PROBE Ø 8, 6 mm EN 61032 Fig. 12
EN 60335-2-75
 
P11.15 SMALL FINGER PROBE ? 5, 6 mm EN 61032 Fig. 13
EN 60335-2-75
IEC61032 IEC60065
P11.16 ACCESS PROBE TO HAZARDOUS FOOD WASTE DISPOSAL UNITS EN 61032 CEI IEC 61032, FIG. 14 – PROBE 31
P11.17 TEST BAR WIDTH 50MM, 5MM THICK ,175MM LONG EN61032 IEC 61032 FIG17 PROBE43
P11.18 TEST BAR WIDTH 3MM, 1MM THICK ,80MM LONG EN61032 IEC 61032 FIG10 PROBE14
P11.19 TEST NEEDLE Ø 0.5 MM, 20MM LONG EN61032 IEC 61032 FIG11 PROBE17
P11.20 "UL" FINGER PROBE   ACCORDING TO UL 1026,
FIG. 6.2 ,UL508 ,FIG.6.4,
UL153,FIG23.1;UL 982,
FIG. 7.1 UL507 FIG9.2,
UL1310-1994
P11.21 HAZARDOUS MOVING PARTS PROBE   UL507 FIG8.1, PA160B
P11.22 RIGIDITY TEST ROD PROBE,Ø 25.4 MM   UL507 FIG8.2 S2140A
P11.23 UNINSULATED LIVE PARTS PROBE   UL507 FIG1.1
P11.24 TACCESSIBILITY PROBE/WEDGE   UL 60950-1, FIG. NAF.2, FIG. NAF.3
P11.25 BLUNT-END PROBE   UL1310 FIG14.4(S3252)
P11.26 ENAMELED WIRE PROBE   UL1278 FIG 8.2(PA140A),UL398
FIG 8.2(PA170B) ,UL507(PA170D)
P11.27 TEST HOOK   CEI EN 60601-1,
FIG. 1 UL 6500, FIG. 8.2
P11.28 ULTEST FINGER    
P11.29 UL TEST PROBE   UL1287 FIG,10.1
P11.30 UL TEST PROBE   UL1287 FIG,10.2
P11.31 UL TEST PROBE   UL1287 FIG,10.3
P11.32 UL TEST PROBE   UL1287 FIG,10.4
P11.33 JOINTED IEC TEST FINGER   IEC6 0335-2-14
P11.34 JOINTED IEC TEST FINGER (Ø 125MM)    
P11.35 TEST PROBE PROBE32   IEC61032
P11.36 IEC STEEL ROD Ø 4 MM, 100 MM LONG EN61010-1 EC60065 9.1.3, IEC1010
P11.37 IEC STEEL ROD Ø 3 MM, 100 MM LONG EN61010-1,CSA1010-1 IEC1010, ,UL31010-1
P60950 TEST PORBE ABOUT IEC60950   IEC60950
P60601 TEST PORBE ABOUT IEC60601   IEC60601
P61010 TEST PORBE ABOUT IEC61010   IEC61010
P60335-1 TEST PORBE ABOUT IEC60335   IEC60335
P60529 TEST PORBE ABOUT IEC60529   IEC60529

Leave a message for product
Title
Contact
Tel
Content
Verify Code
Click to change
Note:1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!
Leave a message for product
Title
Contact
Tel
Email
Content
Verify Code
               
Note:1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!

粤公网安备 44030602001691号