Product Navigation
-
IEC 62368 Test Equipment
- IEC60529 IP CODE TESTING...
-
IEC60335-1 Testing equip...
-
Flammability Test Chambe...
-
IEC60884-1Testing Equipm...
- Accessibility Probes
-
Impact Testing
-
IEC60061-3 lamp gauge
-
Electric Safety Tester
-
Environment Test Chamber
-
UL Testing equipment
-
LED Test Instruments
-
Plug, Socket & Switch Te...
-
Oscilloscope
-
Electronic Components Te...
-
Force Meter
-
Tensile Testing Machine
-
Other product
-
Plug and Socket Gauges
Product Details
a brief introdction:
Go gauge for E14 caps on finished lamps 7006-27F-1
The sharp part of the thread shall be broken with a radius of 0.2 mm to 0.3 mm.
Details description:
Go gauge for E14 caps on finished lamps 7006-27F-1
The sharp part of the thread shall be broken with a radius of 0.2 mm to 0.3 mm.
Purpose:
To check the maximum dimensions of the screw thread and dimension T1 minimum of E14 caps on finished lamps.
Testing:
When the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or project
beyond surface X.