Product name：IEC61032 Joined Finger Test Probe

IEC61032 Joined Finger Test Probe

Product Details

The "international" test finger is required by most IEC, EN, CSA standards and UL standards. The Jointed Finger Probe is a high-precision probe in accordance with IEC standards such as IEC 60950, IEC 61010 and is also used for CSA and UL standards. It features a arm simulator to prevent misuse, and restricted joint movement which simulates human finger movement. The finger is made of chrome-plated steel and the rest material of the probe is Delrin.

This is the ONLY Finger Probe available with a integral jack in the handle for continuity testing - as mandated by the IECEE CB Scheme.

Parameters:

Material: metal, except where otherwise specified.
Tolerance on dimensions when no specific tolerance is given:
– on angles:  0
                  −10°
– on linear dimensions: up to 25 mm: 0
                                                −  0,05 mm;  over 25 mm: ± 0,2 mm.

Attention:

Both joints shall permit movement in the same plane and the same direction through an angle of 90° with a 0° to +10° tolerance.

Purpose:

This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger.

Conforms to:

IEC60065, IEC60335-1, IEC60529, IEC60884, IEC60950, IEC61032, IEC60745-1, IEC61032