Product Navigation
-
IEC 62368 Test Equipment
- IEC60529 IP CODE TESTING...
-
IEC60335-1 Testing equip...
-
Flammability Test Chambe...
-
IEC60884-1Testing Equipm...
- Accessibility Probes
-
Impact Testing
-
IEC60061-3 lamp gauge
-
Electric Safety Tester
-
Environment Test Chamber
-
UL Testing equipment
-
LED Test Instruments
-
Plug, Socket & Switch Te...
-
Oscilloscope
-
Electronic Components Te...
-
Force Meter
-
Tensile Testing Machine
-
Other product
-
Plug and Socket Gauges
Product Details
a brief introdction:
E12 Go gauge for caps on finished lamps (7006-27H-1)
PURPOSE:
To check the maximum dimension of the screw thread and dimension T1 minimum of E12 caps on finished lamps.
Details description:
E12 Go gauge for caps on finished lamps (7006-27H-1)
PURPOSE:
To check the maximum dimension of the screw thread and dimension T1 minimum of E12 caps on finished lamps.
TESTING:
When the cap on finished lamps has been screwed into the gauge as far as it will go, the centre contact shall touch surface X. When the lamp is being removed from the gauge, at least two full turns shall be required to disengage the threads. This gauge should be used only in conjunction with the gauge specified on sheet 7006-27J.