Product Details
查看大图

  • Product name： IEC 60950 Annex F Creepage distance tester

  • Product number：CX-PD10
  • Product manufacturer：Chuangxin
  • Product documentation：
你添加了1件商品 查看购物车
a brief introdction：
IEC 60950 Annex F Creepage distance tester This Creepage distance tester For gauging the creepage and clearance distances in dead state between parts under voltage in the operating conditions
Details description：

 IEC 60950 Annex F Creepage distance tester 

1.Basic introduction

Standard: IEC 61010-1-2001, Annex C; IEC 60601; IEC 60950 Annex F
The Gauge Set measures creepage and clearance distances, distances through insulation and other spacings. The set can be used for compliance testing of electronic equipment and other products as required by all international standards. There are 32 gauges starting with very small distances for printed wiring measurements. The range is 0.5mm to 2.0 mm in steps of .1m; and 2.5 to 10.0 mm in steps of 0.5 mm. Tolerance on all gauges is +0 / -0.02 mm. The entire product is fabricated of stainless steel.

2.Dimensions:

CX-PD10 1.0/2.0/2.5/2.8/3.2/3.6/4.0/5.0/5.6/6.3mm
CX-PD30 1/1.05/1.1/1.2/1.25/1.3/1.4/1.5/1.6/1.7/1.8/1.9/2.0/2.1/2.2/2.4/2.5/2.8/3.2/

3.6/4.0/4.2/4.5/5.0/5.6/6.3/7.1/8.0/9.0/10mm

Standards IEC60598 IEC60335 IEC60601 IEC60065
 Customized size are offered.

粤公网安备 44030602001691号