-
IEC 62368 Test Equipment
- IEC60529 IP CODE TESTING...
-
IEC60335-1 Testing equip...
-
Flammability Test Chambe...
-
IEC60884-1Testing Equipm...
- Accessibility Probes
-
Impact Testing
-
IEC60061-3 lamp gauge
-
Electric Safety Tester
-
Environment Test Chamber
-
UL Testing equipment
-
LED Test Instruments
-
Plug, Socket & Switch Te...
-
Oscilloscope
-
Electronic Components Te...
-
Force Meter
-
Tensile Testing Machine
-
Other product
-
Plug and Socket Gauges
50mm Diameter Ball Accessibility Probe with Handle
Standard: IEC 61032, Figure 1 Test Probe A; IEC 61032, Figure 5 Test Probe 1; IEC 60529, Table 6; IEC 60529, Figure M.1; UL 1082
This 50mm diameter Ball Accessibilty Probe is a specially machined assembly to test impact resistance and accessibility according to IEC standards below, as well CSA and UL standards. This assembly consists of three (3) components. The first item is Ergonomics item CX-1A, a 50 mm diameter impact test ball. The impact ball is connected to a 45 mm diameter white stop face, which is 4 mm thick. The 100 mm long white handle completes the assembly.
Our ISO/IEC 17025 accredited laboratory calibrates each of these items to confirm strict compliance to all necessary requirements. ISO/IEC 17025 certificates are available for all the products that Ergonomics offers.
Appliance:
This Test Probe is the neccessary tool to proceed protecting electric shock test of household and similar electrical appliances.
Purpose:
This Test Sphere A is intended to verify the basic protectiion against access to hazardous parts. It's also used to verify the protection against access with the back of the hand.
Conforms to:
Standard IEC61032-1997, IEC60529-2001, GB/T4208-2008 and UL etc.
Technical Parameter:
Sphere Diameter | 50mm |
Guard Diameter | 45mm |
Guard Thickness | 4mm |
Handle length | 100mm |
Handle diameter | 10mm |