Electromagnet Release Vertical Impact Test Machine IEC60068-2-75 for IK07-10 Impact Test

日期：2024-04-29 09:24

浏览次数：19

摘要：Electromagnet Release Vertical Impact Test Machine IEC60068-2-75 for IK07-10 Impact Test

1. Introduction

IK-VT10 IK07-IK10 vertical impact test machine is designed according to IEC-60068-2-75, GB2423.55 Test Ehc. It’s used for testing mechanical strength of household, similar electrical appliances and lamps etc.. The vertical impact test machine is made of striking element which falls freely from rest through a vertical height, on to the specimen surface held in a horizontal plane and guide tube. The equipment is released by electromagnet to ensure instantaneous release and vertical drop.

2. Parameter

Travel height	0-1000mm, manual adjustable
Release mode	Key control, Electromagnet release
Hammer	2J, 5J, 10J, 20J, 50J
Guideway	equipped with 400mm, 300mm, 200mm, and 400mm length guide tube

Next: Single Spring Hammer Test for 0.14J 0.2J 0.35J 0.5J 0.7J 1.0J and 2.0J Impact Testing
Previous: IEC60884-1 Mechanical Impact Test Equipment , IK Pendulum Impact Tester