IEC60884-1 Mechanical Impact Test Equipment , IK Pendulum Impact Tester

日期：2025-04-30 18:44

浏览次数：195

摘要：IEC60884-1 Mechanical Impact Test Equipment , IK Pendulum Impact Tester

1. Introduction

IK01 to IK06 pendulum impact device is designed according to GB2099.1-2008, IEC60884-1 figure 22-26, GB2423 and IEC60068-2-75. It is applied to sheet metal for mechanical impact testing. The mounting bracket can be moved left to right, and impact angle can be adjusted. This device is for 2J below low energy impact testing.

2. Specification

1) Swing pipe: 1000mm (L)*9mm (outer diameter)*0.5mm (thickness), 100±1g (mass)

2) Mounting bracket: 10±1kg, X and Y axis can be adjusted, rotate at ±90⁰

3) Characteristics 0f Striking Elements

Energy/J	≤1 ±10%	2±5%	5±5%	10±5%	20±5%	50±5%
Equivalent mass±2%kg	0.25(0.2)	0.5	1.7	5	5	10
Material	Nylon	steel
R/mm	10	25	25	50	50	50
D/mm	18.5(20)	35	60	80	100	125
f/mm	6.2(10)	7	10	20	20	25
r/mm	-	-	6	-	10	17
l/mm	Depends

4) Fall height

Energy/J	0.14	0.2		(0.3)	0.35	(0.4)	0.5		0.7	1	2	5	10	20	50
Equivalent mass/kg	0.25	(0.2)	0.25	(0.2)	0.25	(0.2)	(0.2)	0.25	0.25	0 .25	0.5	1.7	5	5	10
Fall height±1%mm	56	(100)	80	(150)	140	(200)	(250)	200	280	400	400	300	200	400	500

5) Degrees of protection against external mechanical impacts

IK01	IK02	IK03	IK04	IK05	IK06	IK07	IK08	IK09	IK10
0.14J	0.2J	0.35J	0.5J	0.7J	1J	2J	5J	10J	20J

Next: Electromagnet Release Vertical Impact Test Machine IEC60068-2-75 for IK07-10 Impact Test
Previous: IEC60335-2-6 Figure 101 Aluminium Cooking Pots for Testing Hob Elements