Product name：IP Waterproof Tester

IP Waterproof Tester
1.Introduction:

The Spray Tester IPX 3/4 is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is convenient positioned by the Spray Tester IPX 3/4.The spray pattern of the nozzle is made to the specifications of IE60529. The removable shield feature make it easy to test without the interference of the shield .

2.Applications:

Autostrong Spray Tester IPX 3/4 is designed to perform tests in large and small scale products. It is a great option when a portable tester is necessary. The Spray Tester IPX 3/4 is an alternative to the Oscillating Tube for establishing the degree of protection against ingress water.

The Spray Tester IPX 3/4is intended for use on specimens that will not fit within the diameter of the Tube Tester. The primary IEC tests include IPX3 and IPX4 protection against water spraying and splashing water.

3.Technical Parameter:

 4.IEC60529 IPX3/IPX4 Standard Requirements:




IEC 60529 Hose Nozzle 6.3/12.5mm, IPX5/IPX

 Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve.The interchangeable nozzles assemble easily to the jet handle.

The nozzles are made from stainless steel.

Pressure Gauge	0 - 1.6 bar
Nozzle Diameter	6.3mm(IPX5) ; 12.5mm(IPX6)
Material	Stainless steel nozzle
Reference standards	IEC60529 IPX5 IPX6, IEC60598-1 IEC 60335-1,IEC60745-1

Include: Pressure gauge.

Stainless steel nozzle.

Valve for water flow regulation and shut off.

Hose connector.

IEC60529 IPX5/IPX6Standard Requirements: