Product Details
查看大图

  • Product name：IEC60529 IPX1-IPX2 Movable Rain drip Test device

  • Product number：CX-1
  • Product manufacturer：Chuangxin
  • Product documentation：
你添加了1件商品 查看购物车
a brief introdction：
IEC60529 IPX1-IPX2 Movable Rain drip Test device Product information: Vertical Drip Rain Testing Machine is designed and manufactured according to IEC 60529 Degrees of protection provided by enclosures (IP Code), this equipment is widely used in lamps, electric and electronic products certification testing of IPX1,IPX2. This device has been widely adopted by domestic and foreign products certif
Details description：

IEC60529  IPX1-IPX2 Movable Rain drip Test device

Product information:
Vertical Drip Rain Testing Machine is designed and manufactured according to IEC 60529 Degrees of protection provided by enclosures (IP Code), this equipment is widely used in lamps, electric and electronic products certification testing of IPX1,IPX2. This device has been widely adopted by domestic and foreign products certification laboratories, the performance of this equipment reaches to the international advanced level.

The program of this test equipment is humanized, users can process IPX1~2 testing without re-setting any parameters manually by choosing the default test options; user also can set the test data to meet different testing standards by choosing the refine test options.

 

Technical parameters:

Power supply AC220V /50
Equipment power 1KW
Water supply The water-flow rates is ＞10L/min ±5%, pure water and without impurities, equipped with water cleaning filter
Waterproof test range IPX1,IPX2
Vertical drip rain area 1000mmX1000mm
Drip needle aperture Ф0.4MM
Distance between holes 20MM
Dripping speed (water flow) 1mm/Min,3mm/Min adjustable
Drip height 200MM, adjustable
Test time 10Min, adjustable

For the purpose of the tests, the surface area of the enclosure is calculated with a tolerance of 10%.

Adequate safety precautions should be taken when testing the equipment in the energized condition.

Test for second characteristic numeral 1 with the drip box

The test is made with a device which produces a uniform flow of water drops over the whole area of the enclosure.

The turntable on which the enclosure is placed has a rotation speed of 1 r/min and the eccentricity (distance between turntable axis and specimen axis) is approximately 100 mm.

The enclosure under test is placed in its normal operating position under the drip box, the base of which is larger than that of the enclosure. Except for enclosures designed for wall or ceiling mounting, the support for the enclosure under test should be smaller than the base of the enclosure.

An enclosure normally fixed to a wall or ceiling is fixed in its normal position of use to a wooden board having dimensions which are equal to those of that surface of the enclosure which is in contact with the wall or ceiling when the enclosure is mounted as normal use.

The duration of test is 10 min.

Note: When the base of the drip box is smaller than that of the enclosure under test, the latter may be divided into several sections, the area of each section being large enough to be covered by the dripping water. The test is continued until the whole area of the enclosure has sprinkled for the specified time.


粤公网安备 44030602001691号