Product name：IEC 60529 IPX7 Temporary Immersion Water test chamber

IEC60529 IPX7 Water immersion test chamber

Complied Standards & Clauses

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX7.

Equipment Overview

Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, communication products, household appliances, outdoor lighting and signal devices, etc.

Structure: The test chamber is made of stainless-steel frame, and transparent transparent thickened tempered glass. The basket lifting is driven by electric hoist, which is convenient for operation.

Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under temporary immersion in water at degree IPX7.

Principle: By controlling the depth of the sample in the water to achieve a standard equivalent pressure, to produce water pressure across the entire surface of the specimen enclosure.

Use Environment:

Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860 mbar -1060 mbar), there should be equipped with lighting, the ground needs to be flat, and the water intake and drainage function should be good.

Water source: clean water or tap water without impurities, equipped with water cleaning filter.

Control & Operation	Push-button operation
Chamber Size	Inner chamber: WDH=800×800mm×1200mm Outer chamber: WDH=860×860mm×1800mm Or can be customized
Highest Water Depth	1200mm, with a scale, the resolution of scale is 1mm Or can be customized
Basket Size	Stainless steel basket: WD=500×500mm
Lifting Control	Driven by electric hoist
Test Duration	30min, manually controlled
Material	Stainless steel frame, tempered glass