Product Details
查看大图

  • Product name：IEC60695-2-10 Glow Wire U Type Nickel Chromium Element

  • Product number：CX-51
  • Product manufacturer：Chuangxin
  • Product documentation：
你添加了1件商品 查看购物车
a brief introdction：
IEC 60695-2-10 Glow - Wire U Type Nickel Chromium Element This glow-wire meets the requirements of IEC 60695-2-10 clause 4.1. The glow-wire is formed from nickel/ chromium (> 77 % Ni/20 ± 1 % Cr) wire, having an overall diameter of 4.00±0.07mm (before bending). The dimensions of the glow wire loop are as detailed in Figure 1.
Details description：

 IEC 60695-2-10 Glow - Wire U Type Nickel Chromium Element
Product overview:

This glow-wire meets the requirements of IEC 60695-2-10 clause 4.1. The glow-wire is formed from nickel/ chromium (> 77 % Ni/20 ± 1 % Cr) wire, having an overall diameter of 4.00±0.07mm (before bending). The dimensions of the glow wire loop are as detailed in Figure 1.

 

Glow - Wire U Type IEC 60695-2-10 Nickel Chromium Element 0

 

Technical Parameters: 

No. Item Parameters
1 Material nickel/ chromium (> 77 % Ni/20 ± 1 % Cr)
2 Diameter 4.00±0.07mm (before bending)
3 Detailed dimension Refer to IEC 60529-2-10 Figure 1
4 Hole for thermocouple Ф1mm (Ф0.5mm can be optional)
A new glow wire shall be annealed for a total at least 10 h by being subjected to a current of at least 120A before being sued for a test run. The total annealing time may be achieved cumulatively. To avoid damage, the thermocouple shall not be installed during annealing. At the end of annealing, the depth of the thermocouple pocket hole shall be verified.
 
Glow - Wire U Type IEC 60695-2-10 Nickel Chromium Element 1

The glow-wire in the glow-wire test apparatus


粤公网安备 44030602001691号