Product Details
查看大图

  • Product name：IEC60335-1 Test Corner Electrical Appliance Temperature Rise Heating Tester

  • Product number：CX-W16
  • Product manufacturer：Chuangxin
  • Product documentation：
你添加了1件商品 查看购物车
a brief introdction：
IEC60335-1 Test Corner Electrical Appliance Temperature Rise Heating Tester IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 11 Samples and Restrictions: Household and similar electrical appliances such as microwave oven, refrigerator and etc.
Details description：

IEC60335-1  Test Corner Electrical Appliance Temperature Rise Heating Tester

Standards & Clauses:

IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 11


Samples and Restrictions:

Household and similar electrical appliances such as microwave oven, refrigerator and etc.

 

Application:

It is used to measure the temperature rise of various electrician and electrical appliances during normal use.

Black Plywood Test Corner Electrical Appliance Testing Equipment Temperature Rise Heating Test 0

Test Principle:

Thermocouples used for determining the temperature rise of the surface of walls, ceiling and floor of the test corner are attached t the back of small blackened disks of copper or brass, 15mm in diameter and 1mm thick. The front of the disk is flush with the surface of the board. The thermocouples are connected to the temperature measurement instrument to monitor the temperature at each point in real time.

 

Structure:

It consists of 20mm thick plywood boards coated with matt black paint, with temperature measuring copper on its surface, and thermocouple connected to the terminal block. The size of the boards and the number of temperature measurement points can be customized.

Black Plywood Test Corner Electrical Appliance Testing Equipment Temperature Rise Heating Test 1

Use Environment:

 

Working temperature 0-40 ° C, humidity 30%-90%

 

Technical Parameters:

Dimensions WDH=600X600X1000mm, 800X800X1000mm, 1000x1000x1200mm are optional,or can be customized
Thermocouple American original OMEGA thermocouple with diameter less than 0.3mm, type K
Thermocouple Arrangement All lead to the terminal block
Temperature Measurement Copper 15mm diameter, 1mm thick brass sheet, the front surface of the round copper sheet is flush with the surface of the plywood
Temperature Measurement Points 20 points per each surface, can be customized for 32 points, 48 points, 64 points or other
Temperature Measurement Point Arrangement 100×100mm square distribution, can be customized 76×76mm or 50×50mm
Plywood 20mm thickness, matte black paint on the front and gray film on the back
Structure 1 base plate, 2 side plates, 1 top plate
Optional Temperature measurement and record instrument


 


Dimension 600X600X600mm 800x800x1000mm 1000x1000x1000mm
Thermocouple <0.3mm  Imported K type
Thermocouple disposal Disposal  in a line bank( select and fit out thermocouple plug and socket)
Test temperature sheet copper Diameter15mm, thickness1mm sheet brass
Test Temperature point 20point, 32point, 48point(other);
Test Temperature point disposal 100mm X 100mm / 76X76mm Square
Glued board Thickness about 20mm,  Berlin black  in face,Stick the gray sheet glued board in rear
Active part Install 4 pcs active wheels
Provide Personalized service

粤公网安备 44030602001691号