Product Details
查看大图

  • Product name：IEC60335-1 Single Station Electrical Appliance Testing Equipment Insulation Surface Scratch Resistance Test

  • Product number：CX-F15
  • Product manufacturer：Chuangxin
  • Product documentation：
你添加了1件商品 查看购物车
a brief introdction：
IEC60335-1 Single Station Electrical Appliance Testing Equipment Insulation Surface Scratch Resistance Test Standards & Clauses: IEC60335-1:2016“Household and similar electrical appliances-Safety-Part1:General requirements”clause 21.2 IEC60950-1:2013“Information technology equipment-Safety-Part1:General requirement”clause 2.10.8.4 Samples and Restrictions: Solid insulated parts that have
Details description：

IEC60335-1 Single Station Electrical Appliance Testing Equipment Insulation Surface Scratch Resistance Test 


Standards & Clauses:

IEC60335-1:2016“Household and similar electrical appliances-Safety-Part1:General requirements”clause 21.2

IEC60950-1:2013“Information technology equipment-Safety-Part1:General requirement”clause 2.10.8.4

 

Samples and Restrictions:

Solid insulated parts that have been touched, coated with printed boards or coated components of household and similar appliances

 

Application:

It is used to check whether accessible parts of solid insulation shall have sufficient strength to prevent penetration by sharp implements.

 

Structure:

Desktop structure, size: about 600 × 550 × 600 (mm) W × H × D, weight: 60kg

 

Use Environment:

Power supply:AC220V±10%/50-60Hz or match client's local power supply requirements

Working temperature 0-40 ° C, humidity 30%-90%

 

Technical Parameters:

Test Station Single
Electrical control method PLC intelligent integrated control, 7-inch humanized touch screen operation
Drive Mode Stepper motor drive, automatic three-axis
Sample clamping method Mounted to the turntable by pressing plates
Rounded Tip Of Steel Pin R0.25±0.02mm
Cone of Steel Pin 40°
Scratch Speed 20 mm±5 mm /s, can be preset
Scratch Pressure 10N±0.5N
Scratch Spacing 0-50mm,can be preset
Test Times 0~9999 times, the testing will be stopped automatically after the preset test times are completed.
Scratch Angle 80-85°, fixed by fixture
Turntable Can rotate 90°, with multiple mounting holes for mounting different samples
Optional 30N±0.5N pressure device

 

 

Single Station Electrical Appliance Testing Equipment Insulation Surface Scratch Resistance Test IEC60335-1 0

 

Test Principle:

 

The surface of the insulation is scratched by means of a hardened steel pin, the end of which has the form of a cone with an angle of 40 °. Its tip is rounded with a radius of 0.25mm±0.02mm. The pin is held at any angle from 80 ° to 85 ° to the horizontal and loaded so that the force exerted alng its axis is 10N±0.5N. The scratches are made by drawing the pin along the surface of the insulation at a speed of approximately 20 mm/s. Two parallel scratches are made. They are spaced sufficiently apart so that they are not affected by each other, their length covering approximately 25% of the length of the insulation. Two similar scratches are made at 90° to the first pair without crossing them.

This apparatus adopts PLC + touch screen control system, and stepping motor. The scratch distance, scratch times and scratch speed can be preset. It is easy to achieve scratch test in both directions by rotating to 90°angle automatically.



粤公网安备 44030602001691号