Product name：IEC60335 -1 Electrical Appliance Cord Anchorage Pull Force And Torque Test Apparatus

IEC60335-1 Electrical Appliance Cord Anchorage Pull Force And Torque Test Apparatus

Standards & Clauses: 
IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 25.15

GB2099.1-2008clause 23.2 Plugs and socket-outlets for household and similar purposes- Part1:General requirements
GB3883.1-2008clause 24.14 Safety of hand-held motor operated electric tools Part1:General requirements
GB4706.1-2005clause 25.15 Household and similar electrical appliances-Safety-Part1:General requirements
GB7000.1-2015clause 5.2.10.3 Luminaries-Part1:General requirements and tests
GB8898-2011clause 16.5 Audio, video and similar electronic apparatus-Safety requirements
IEC60884-1:2006clause 23.2 Plugs and socket-outlets for household and similar purposes- Part1:General requirements
IEC60745-1:2006clause 24.14 Safety of hand-held motor operated electric tools Part1:General requirements

IEC60598-1:2014clause 5.2.10.3 Luminaries-Part1:General requirements and tests
IEC60065:2005clause 16.5 Audio, video and similar electronic apparatus-Safety requirements

 
Technical Parameters:

Test Station	Single
Control Method	Touch screen
Drive Method	Motor and electromagnet drive
Clamping Method for Specimen	Mechanical clamping, the height of clamping point is adjustable through adjusting screw rod
Pull Weight	10N * 1 piece, 20N * 3 pieces, 30N * 2 pieces (Can achieve 30N, 40N, 60N, 80N, 100N, 120N pull force)
Torque Weight	4N* 1 piece , 5N* 1 piece , 7.5N* 1 piece , 12.5N* 1 piece , 17.5N* 1 piece , 21.25N* 1 piece,torque arm is 20mm (can achieve 0.08N.m, 0.1 N.m, 0.15N.m, 0.25 N.m, 0.35 N.m, 0.425 N.m torque)
Pull Cycles	0~999999 can be preset, default of 25 cycles
Pull Frequency	1 cycle / s
Torque Time	0.1S～99 h 59 m 59s
Test Contents	Pull and torque testing: make a mark on the cord where is 20mm to the anchorage, then apply the pull force at a rate of 1 time/second, after finishing pull testing, apply the torque for 1 min. The displacement of the mark position on the cord should not exceed 2 mm after testing.

 

Product overview

Samples and Restrictions	Plugs for connecting flexible cables, fixed or mobile sockets; hand-held power tools; household appliances with flexible cord anchorage (eg induction cookers, washing machines); lamps with cables and wires; audio and video and related signal electronic devices with flexible cords (such as projectors)
Application	The cord anchorage shall relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion. This testing appliance applies pull force and torque tests for cord anchorage, to verify the reliability of the cord anchorage.
Test Principle	The eccentric wheel is driven by a motor, to make the pull weight pulled for 1s; the torque is applied to the sample by the electromagnet releases the torque weight, at the same time, the direction of the force applied and the axis of the sample form a torque arm through the torque wheel, so as to achieve torque test. The pull weights and torque weights can be customized to meet different requirements in different standards.
Structure	The equipment adopts motor cam ejector mechanism, the pull fixture is combined with the torque fixture, and matched by the bearing in the middle to reduce the friction during the torque test. The Z-shaped structure enables the fixture to clamp the appliance’s power cord which is 150mm above the bottom surface. It can test the firmness of the power cord anchorage of large household appliances, such as refrigerators and washing machines. Equipment dimensions:about:800×400×1200(mm)W×D×H Equipment weight:110kg
Use Environment	Power supply:AC220V±10%/50-60Hz,0.3KW

 

Detail display