Product Details
  • Product name:IEC 60529 IPX5 IPX6 Strong Water Spray Testing Equipment Open Type

  • Product number:IPX56A
  • Product manufacturer:Chuangxin
  • Product documentation:
你添加了1件商品 查看购物车
a brief introdction:
IEC 60529 IPX5 IPX6 Strong Water Spray Testing Equipment Open Type Complied Standards & Clauses IEC 60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX5 & IPX6. Equipment Overview Structure: The test equipment consists of a water jet mechanism, an electrical control cabinet, a water storage tank, a support for nozzle, and a turntable. The sample is placed on the turntable, t
Details description:

IEC 60529 IPX5 IPX6 Strong Water Spray Testing Equipment Open Type

Complied Standards & Clauses

IEC 60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX5 & IPX6.

Equipment Overview

Structure: The test equipment consists of a water jet mechanism, an electrical control cabinet, a water storage tank, a support for nozzle, and a turntable. The sample is placed on the turntable, the turntable is caused to rotating by motor driving at a rotation speed of 1r/min, to make the enclosure is sprayed from all practicable directions with a stream of water from the standard test nozzles. The electrical control part and water storage tank are integrated. This whole system adopts open structure.

 

Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, communication products, household appliances, outdoor lighting and signal devices, etc
 
Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water jets at degree IPX5 and IPX6.
 
Principle: Ensure that the water jet speed reaches the standard required value by controlling the water supply flow, the enclosure is sprayed from all practicable directions with a stream of water from a standard test nozzle as shown in IEC 60529 figure 6.
 
Use Environment:
Power supply: AC380V±5%/50Hz, 5KVA, or match client’s local power supply requirements.
Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860 mbar -1060 mbar), there should be equipped with lighting and waterproof leakage switch (or socket), the ground needs to be flat, and the water intake and drainage function should be good.
Water source: clean water or tap water without impurities, equipped with water cleaning filter.

Technical Parameters


Control & Operation PLC and touch screen intelligent control system
Nozzle Internal Diameter IPX5:Ф6.3mm; IPX6:Ф12.5mm
Water Spray Flow Rate IPX5: 12.5±0.625L/min; IPX6: 100±5 L/min, Manually adjustable (rotameter)
Water Jet Distance 2.8m ((The distance from the nozzle to the center surface of the turntable, standard requires 2.5-3m)
Water Jet Direction The angles can be adjustable by adjusting the supports
Fixing Method for Nozzles Mechanically fixed to the support
Pressure Gauge 0~0.25MPa, can be displayed
Test Duration 0.01S~99.9min, can be preset (standard requires likely 1min/m² or minimum: 3 min)
Turntable Diameter: Φ600mm, rotation speed: 1r/min, bearing capacity: ≤50 kgs
Water Storage Tank This test system adopts open type structure, the test water is not recycled. The test system is equipped with an approximately 500L stainless steel water storage tank. The water storage tank is equipped with a water level float valve to automatically control the water inlet, and has high and low water level alarm detection, to effectively prevent the pump from being damaged due to dry water.
Safety Protection Phase sequence protection, leakage protection, water shortage protection, abnormal protection.

Shipping & package

Shipping by air or by sea 
1.By sea: slow but conomy for large equipment, and long times shipping (most about 30days),
2.By air :faster and more expensive for large equipment.

FAQ
1.Can I get a sample from you?
Currently we don't  provide free samples, but you can get a paid one.

2.Which kind of inquiring is preferred? 
A quality inquiring help us to quote more effectively.
It should include: A brief self-introduction; Some inquiry details such as product name, standards, quantity, size, etc. But never forget to leave your contact information.

3.What is the payment terms?
T/T ,Paypal,Western Union,Ali assurance  etc

4.What is the delivery time?
3-7days if in store, big equipment is about 30-60 working days 

5.Can I book a factory tour?
Yes. Please contact us to arrange it.

6.What is your equipment warranty?
1year,if you need more ,welcome to contact us get more details .

7.What's your working hours?
8:30~12:00  13:00~19:00 (from Monday to Friday)


粤公网安备 44030602001691号