Product Details
查看大图

  • Product name：IEC60695-11-5 Standard Needle Flame Testing Machine

  • Product number：CX-Z18A
  • Product manufacturer：Chuangxin
  • Product documentation：
你添加了1件商品 查看购物车
a brief introdction：
IEC60695-11-5 Standard Needle Flame Testing Machine
Details description：

Application:

Needle Flame tester is designed and manufacture according to IEC60695-11-5 and other similar international standards. 

  

With predetermined size(Φ0.9 mm) needle burner, in 45°angle burning product, measure the fire risk by product light-off or hold burning time .

 

Used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, electrical instrument, electrical connector such as electrical and electronic equipment and parts, components of research, production and quality inspection department, also suitable for insulation materials, engineering plastics.

Technical parameters

Needle burner

inner hole diameter Φ0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel

Burner angle

0°, 20°, 45°(adjust flame height)

Thermocouple

Ø0.5mm Type K(Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C

Burning time

0-999.9s ± 0.1s adjustable(usually selected for 30s)

Hold Burning time

0-999.9s ± 0.1s, automatic recording, manual timeout

Flame Height

12mm ± 1mm(with height measurement instruments)

Flame Gas

butane gas/Butane gas, min. 95% purity(can use bottled lighter gases)

Temperature Test Range

0~1000°C

Flame Temp Requirements

from 100°C ± 2°C liters to 700°C±3°C time in 23.5 seconds ±1 seconds

Standard Copper Block

4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP

Test process

automatic control, independent convulsions

Chamber

≥0.5m3

Size

W1100mm×D700mm×H1300mm, exhaust hole Ø100mm

Control

Using single chip microcomputer + touch screen control

Consult standard

IEC60695-2-10

Power Supply

800VA ,220V, 48-60Hz

Display panel language

English

粤公网安备 44030602001691号