-
IEC 62368 Test Equipment
- IEC60529 IP CODE TESTING...
-
IEC60335-1 Testing equip...
-
Flammability Test Chambe...
-
IEC60884-1Testing Equipm...
- Accessibility Probes
-
Impact Testing
-
IEC60061-3 lamp gauge
-
Electric Safety Tester
-
Environment Test Chamber
-
UL Testing equipment
-
LED Test Instruments
-
Plug, Socket & Switch Te...
-
Oscilloscope
-
Electronic Components Te...
-
Force Meter
-
Tensile Testing Machine
-
Other product
-
Plug and Socket Gauges
Introduction:
Cable bending testing machine is designed according to the relevant standard requirements of chapters 23.4 in U-L817 and IEC60884-1,which apply for bending endurance test for power cord ,cable, wire and cable connected with plug.
Apply to the relevant manufacturers and quality inspection departments for the plugs and the power line of electrical appliances to go on the bending connecting parts test.
Technical Parameters:
1. Power supply: AC220V/50Hz ±10%
2. The test rate: 10 to 30 times per min(Count on each one from left and right)
3. The bending angle:0°(From left and right each angle is 90°)
4. The weight of the poise: Each of 113g,284g and 500g, each of them have six.
5. Working: Can go for six work stations power cords test at the same time.