Product Details
查看大图

  • Product name：IEC 60529 IPX1/2/3/4/5/6 Comprehensive Water Ingress Testing Chamber

  • Product number：CX-IPX1-6
  • Product manufacturer：Chuangxin
  • Product documentation：
你添加了1件商品 查看购物车
a brief introdction：
IEC 60529 IPX1/2/3/4/5/6 Comprehensive Water Ingress Testing Chamber Standard: IEC60529:1989 +A1:1999 +A2:2013 IPX1, IPX2, IPX3, IPX4, IPX5, IPX6 test, figures 4 and figure 6.
Details description：

IEC 60529 IPX1/2/3/4/5/6 Comprehensive Water Ingress Testing Chamber 

Equipment Overview

General application areas: outdoor lighting, household appliances, auto parts and other electronic and electrical products.

Standard: IEC60529:1989 +A1:1999 +A2:2013 <Degrees of protection provided by enclosures (IP Code)> IPX1, IPX2, IPX3, IPX4, IPX5, IPX6 test, figures 4 and figure 6.


Equipment Features

1.Suitable for product IPX1, IPX2, IPX3, IPX4, IPX5, IPX6 waterproof rating test.

2. The outer casing is made of domestic high-quality steel plate, and the surface is painted with baking varnish, which is beautiful and durable.

3.The inner chamber and turntable are all made of SUS304# stainless steel plate to ensure long-term use without rust.

4. There is a transparent observation window on the door, and LED lighting inside of the chamber, easy for operator to observe the internal test.

5. IPX34: Configured R200mm and R400mm oscillating tubes according to the specifications of IEC60529 figure 4 (as shown below)

6. IPX56: Configured a spray nozzle according to the specifications of IEC60529 figure 6 (as shown below): 

7. Turntable drive: use high-quality stepper motor, can automatically control the positive and negative rotation (forward and reverse: suitable for the sample power-on test and to prevent cable winding).

8. The test time can be set on the touch screen. The setting range is 0-999min (adjustable).

9. The core control system adopts 7-inch touch screen + PLC. The electrical components adopt imported brands such as Omron. The wiring process conforms to the requirements of national standards. The layout of the electric board is reasonable, the wiring is firm and the marking is clear.

10. There is configured with a waterproof socket inside the chamber for power on the sample.

11. With safety protections of leakage protection, water shortage protection, short circuit protection.

  

Technical Parameters:


Technical Parameters Basic Parameters
Inner Chamber Size L1000*W1000*H1000mm
Outer Chamber Size L1480*W3800*H1800mm
Turntable Diameter ￠400mm
Turntable Maximum Load Bearing 10KG
Turntable Speed 1-5r/min (adjustable)
Turntable Rotation Method Always positive / positive and negative alternate
Flow Adjustment Method Manually adjust flow by adjusting flow meter on the panel
Test Time 0-999 min
Power supply for sample

Configured with a waterproof socket inside the chamber for client to power on sample during test


Equipment dimensions Approx.2770mm(L)*1330mm(W)*1750mm(H)
Total Weight Approx. 350kg
Required site place 3.2m(L)*2m(W)*2m(H)
IPX12 Dripping Testing Parameters
Drip area 600*600mm
IPX12 nozzle size Diameter 0.4mm
Distance between drip holes 20*20 mm
Water flow IPX1=1mm/min; IPX2=3mm/min
Drip board lifting method Not lifting (fixed)
IPX34 Oscillating Tubes Parameters
Oscillation Tube R200 mm and R400mm
Distance between Nozzle Sample Within 200mm
Spray Aperture Spacing 50 mm
Oscillating Tube Swing Angle

±60° (IPX3),

approximately ±160°(IPX4)

(Note: standard requires IPX3:120°; IPX4: almost 360°, but due to there is turntable under oscillating tube during test, so 360° can not achieved during actual testing, if without turntable, then 360° can be achieved)

Angle Between Two Holes

120°(IP3)

180°(IP4)

Needle Hole φ0 .4 mm
Oscillating Speed IPX3: 15times/min; IPX4: 5times/min
Water Flow of Each Hole 0.07 L/min +5%
Spray Pressure 80-150Kpa
IPX34 Spray Nozzle Parameters
Parameters of Spray Nozzle Outer diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole at the center, 2 inner circles of 12 holes at 30° pitch,4 outer circles of 24 holes at 15° pitch, total 121 holes of Ф0.5mm, made of brass.
Water Flow 10L/min±5% adjustable by flow meter (flow meter is not included in this item, should be prepared by user)
Pressure 50～150Kpa, the pressure gauge measuring range: 0～0.25Mpa
Moving Shield

Made of aluminum, can be detachable

Note: the aluminum moving shield is easy to deform, pay attention during use

IPX56 Jet Nozzle Parameters
IPX5 Nozzle Jet Aperture 6.3mm
IPX6 Nozzle Jet Aperture 12.5mm
IPX5Jet Flow 12.5±0.625
IPX6 Jet Flow 100±5L/min
Water Pressure (Mpa) Adjusted according to the specified water flow
Jet Distance 2.5M (nozzle away from the center of the turntable)
Nozzle Fixed Method Mechanical fixing
Electrical Parameters
Power Supply for Equipment 380V, 50Hz
Equipment Power 3.0KW
Safety Protection Function Leakage protection, water shortage protection, short circuit protection
Conditions of Use The following conditions are guaranteed by the user and the corresponding connection is completed.
Environmental Conditions

Temperature:5℃～35℃

Relative humidity: ≤85%

Air pressure:86kPa～106kPa

Power Supply Conditions
Voltage, Frequency AC380V±10%; 50Hz±10%; three-phase four-wire + protective ground wire
Power 3.0kW
Protective Grounding Resistance Grounding resistance of protective grounding wire is less than 4Ω
Power Switch

1. The user is required to configure the leakage protection air switch of the corresponding capacity for the equipment at the installation site, and the switch must be used independently for the device.

2. It is forbidden to use the knife switch or power socket.

3. The leakage protection air switch is not more than 2 meters away from the equipment.

Water Source

1. The user is required to configure the water source for the equipment at the installation site, the water pressure is not less than 0.2Mpa, and the 4-point faucet is installed.

2. The position of the faucet is no more than 2 meters away from the equipment.

粤公网安备 44030602001691号